Product Specifications

What's in the box
  • Two MACADAM Road platforms (Keo® or SPD-SL® depending on the chosen model).
  • Two MASSIF MTB / Gravel platforms (SPD®).
  • One connected spindle (left).
  • One standard spindle (right).
  • One charging cable (USB A).
  • Two adaptation washers if needed for your crankset.
  • A quick start guide.

By default, your spindles come pre-assembled on your pair of MACADAM platforms. If you'd rather receive them assembled on your MASSIF pair, just leave us a comment when placing your order.

Data Provided

✅ Power (left leg x 2)
✅ Cadence
✅ Pedalling Efficiency
✅ NP (Normalised Power): a weighted average power that reflects the physiological cost of your ride more accurately than a simple average, by smoothing out surges and excluding freewheeling periods.
✅ IF (Intensity Factor): a metric representing the intensity of your effort. When the normalised power sustained over one hour approaches your FTP (Functional Threshold Power), the IF approaches 1 (or 100%).
✅ Power zone distribution.
✅ Power-to-weight ratio.

Battery
  • 3.7V DC, 110 mAh Li-ion battery. Input: 5V DC, 60 mA.
  • 20+ hours battery life.
  • Battery level displayed on your GPS.
  • Low battery alert below 5 hours remaining.
  • Full charge in under 5 hours. No need to remove your pedals to charge — the charging pin is located at the tip of the spindle.
Optimal Operating Conditions

CyclOptim pedals feature a built-in temperature compensation system to ensure that fluctuations do not affect data accuracy.

The optimal operating range is -10°C to +50°C. Outside these limits, your pedals will continue to function, but data reliability may be compromised.

Prolonged exposure to extreme heat or cold may also accelerate wear on the internal electronics.

As with any battery-powered electronic device, exposure to extreme heat can severely damage the battery or, in the worst case, cause it to rupture. Please refer to the manual for further information.

Maintenance

The pedals are IPX7-rated, so they can be cleaned alongside your bike. That said, avoid directing a high-pressure jet directly at the pedals from close range.

Configuration and updates

Configuration is handled directly from your GPS or smartwatch. The only parameter you'll need to enter is your crank length — if you're unsure how to measure it, refer to our manual).

Not sure whether your GPS or watch supports ANT+? Check the list of compatible devices here.

Initial calibration is also required at installation; the full procedure is covered in the online manual.

Firmware updates can be pushed remotely via an app on your phone (Android or iOS). Our companion app is coming soon — in the meantime, updates are handled through a third-party app. Whenever a new update is available, you'll receive an email with a step-by-step guide.

In short

  • Made in France

  • ANT+

  • IPX7

  • Q-Factor

  • Stack Height MACADAM

  • Stack Height MASSIF

  • MACADAM Power meter weight

  • MASSIF Power meter weight

Standard KEO®

Standard SPD-SL®

Standard SPD®

Quick and easy charging

Charge your spindle easily without removing them from your bike!

ANT+ Protocol

Easily connect to your GPS computer or smartwatch via ANT+.

Built to last

Rated IPX7 for dust and water resistance, your pedals will handle whatever you throw at them.

What's under the bars

Power, Cadence and +

Accuracy of ±1%

High-Tech & Durable

Ease & Comfort

Load video:

Swap platforms in minutes

 

ROAD ↔️ MTB ↔️ GRAVEL ↔️ INDOOR TRAINER

[ ↔️ UNICYCLE ↔️ TRICYCLE ... if you insist 🤷🏻‍♂️ ]

That's the original idea behind CyclOptim, from day one: ultra-versatile power meters that let you switch easily from one discipline to another.

 

Technology built into the spindle. Platform change in less than 4 minutes.

All our Combo Packs

Compare the Lite Pack with our other Combos.

Pack Combo LITE
15.925,00 Kč
CLASSIC Combo Pack
22.146,00 Kč
ULTRA Combo Pack
31.103,00 Kč

2 Spindles included

1 sensor spindle (left)
1 standard spindle (right)

2 Spindles included

2 sensor spindles (left and right)

2 Spindles included

2 pairs of sensor spindles
(2 left and 2 right)

4 Platforms included

2 MASSIF MTB / Gravel platforms (SPD®)
2 MACADAM Road platforms (SPD-SL® or KEO®)

4 Platforms included

2 MASSIF MTB / Gravel platforms (SPD®)
2 MACADAM Road platforms (SPD-SL® or KEO®)

4 Platforms included

2 MASSIF MTB / Gravel platforms (SPD®)
2 MACADAM Road platforms (SPD-SL® or KEO®)

✅ Power

(left leg × 2)

✅ Dual-sided power

—

✅ Dual-sided power

—

✅ Cadence

—

✅ Cadence

—

✅ Cadence

—

❌ Left/Right balance

—

✅ Left/Right balance

—

✅ Left/Right balance

—

✅ Efficiency

—

✅ Efficiency

—

✅ Efficiency

—

Other data

✅ NP (Normalized Power)
✅ IF (Intensity Factor)
✅ Power zone distribution
✅ Power-to-weight ratio

Other data

✅ NP (Normalized Power)
✅ IF (Intensity Factor)
✅ Power zone distribution
✅ Power-to-weight ratio

Other data

✅ NP (Normalized Power)
✅ IF (Intensity Factor)
✅ Power zone distribution
✅ Power-to-weight ratio

🏅 Advantage

The most affordable way to get started with power meters, on any terrain.

🏅 Advantage

The most practical solution: accurate data on every terrain. Swap platforms and bikes in just minutes.

🏅 Advantage

The most complete option, ideal for riders who enjoy both road and mountain biking all year round. No need to ever swap your pedals again.

FAQ

Please consult our general FAQ page for information on our other products.

Is the battery replaceable?

Yes, the battery is replaceable. However, since it is sealed inside the spindle, the replacement can only be carried out by our team in our workshop. If needed, contact our customer service. But rest assured, you have plenty of time: our batteries are designed to withstand more than 1,000 full charge cycles before they begin to lose a little of their range.

Do the pedals support Bluetooth®?

The pedals communicate with GPS devices and smartwatches via ANT+ — the industry-standard protocol for sports sensors. If you're unsure whether your device is compatible, you can check the full list here.

Bluetooth (BLE) support is planned in a future software update, expanding compatibility with even more devices.

What is a Combo Pack?

Our power meters are designed to be used across all your riding styles (road, mountain bike, gravel). Swap platforms and keep your sensor spindles. Our Combo Packs are our different bundles at attractive prices, giving you all the accessories you need (spindles and platforms, depending on how you ride). You can save up to €130 compared with buying separately.

Couldn't find an answer to your question?

Get in touch with the CyclOp-Team!

If you prefer to stay within a single universe:

MACADAM

Our road pedals

Discover
 

MASSIF

Our MTB / GRAVEL Pedals

Discover