
Standard KEO®

Standard SPD-SL®

Standard SPD®








2 connected axles - 4 platforms (MTB + Road)
Move your pair of sensors from your road bike to your MTB or Gravel bike in minutes. One set of sensors — one smart, economical, and sustainable choice! It's Smart, just like your CyclOptim pedals.
Your CLASSIC Combo Pack includes a complete pair of MACADAM Classic pedals (KEO® or SPD-SL® of your choice) and a pair of MASSIF platforms (SPD®).
ℹ️ By default, your spindles will be pre-installed on your road platforms (MACADAM). If you'd prefer them fitted on your MTB platforms (MASSIF) instead, just leave a note at checkout.

Pairs well with

CLASSIC Combo Pack
By default, your spindles come pre-assembled on your pair of MACADAM platforms. If you'd rather receive them assembled on your MASSIF pair, just leave us a comment when placing your order.
✅ Total Power (both legs)
✅ Cadence
✅ Pedalling Efficiency
✅ Left/Right Balance
✅ NP (Normalised Power): a weighted average power that reflects the physiological cost of your ride more accurately than a simple average, by smoothing out surges and excluding freewheeling periods.
✅ IF (Intensity Factor): a metric representing the intensity of your effort. When the normalised power sustained over one hour approaches your FTP (Functional Threshold Power), the IF approaches 1 (or 100%).
✅ Power zone distribution.
✅ Power-to-weight ratio.
CyclOptim pedals feature a built-in temperature compensation system to ensure that fluctuations do not affect data accuracy.
The optimal operating range is -10°C to +50°C. Outside these limits, your pedals will continue to function, but data reliability may be compromised.
Prolonged exposure to extreme heat or cold may also accelerate wear on the internal electronics.
As with any battery-powered electronic device, exposure to extreme heat can severely damage the battery or, in the worst case, cause it to rupture. Please refer to the manual for further information.
The pedals are IPX7-rated, so they can be cleaned alongside your bike. That said, avoid directing a high-pressure jet directly at the pedals from close range.
Configuration is handled directly from your GPS or smartwatch. The only parameter you'll need to enter is your crank length — if you're unsure how to measure it, refer to our manual).
Not sure whether your GPS or watch supports ANT+? Check the list of compatible devices here.
Initial calibration is also required at installation; the full procedure is covered in the online manual.
Firmware updates can be pushed remotely via an app on your phone (Android or iOS). Our companion app is coming soon — in the meantime, updates are handled through a third-party app. Whenever a new update is available, you'll receive an email with a step-by-step guide.
In short

Made in France

ANT+

IPX7

Q-Factor

Stack Height MACADAM

Stack Height MASSIF

MACADAM Power meter weight

MASSIF Power meter weight

Standard KEO®

Standard SPD-SL®

Standard SPD®
Quick and easy charging
Charge your spindle easily without removing them from your bike!
ANT+ Protocol
Easily connect to your GPS computer or smartwatch via ANT+.
Built to last
Rated IPX7 for dust and water resistance, your pedals will handle whatever you throw at them.

Power, Cadence and +
Our pedals don't just measure watts; they also calculate and provide data to help you improve your performance, guide your training effectively, or simply get to know yourself better:

Accuracy of ±1%
Our sensors are integrated directly into the pedal spindle — the closest point to your effort, ensuring reliable and accurate measurement. They rely on four strain gauges mounted in a Wheatstone bridge, sensitive enough to precisely capture the force you apply. Though invisible, this force causes a micro-deformation of the material, perfectly proportional to the effort exerted.
This deformation is analysed by the pedals' microcontrollers and onboard software, then converted into power. The relationship between deformation and force is established through individual calibration carried out in our laboratory at assembly. The result: power measured in real time to ±1% accuracy.

High-Tech & Durable
Built to handle every condition. Your pedal platforms are made from a nylon and fibreglass composite:
The electronics are partly embedded in the axle, machined from aerospace-grade stainless steel. The strain gauges sit on the axle body, encapsulated in resin — absorbing shocks, reinforcing the waterproof seal, and buffering thermal fluctuations.
Your pedals and sensors are rated IPX7.

Ease & Comfort
Compatible with SPD-SL® or KEO® cleats (for MACADAM platforms) and SPD® cleats (for MASSIF platforms), CyclOptim pedals won't change how your ride feels or how much you enjoy it. They simply give you data to make your training even more fun and effective!
They can be fitted on any bike, including your indoor trainer for off-season workouts.
ROAD ↔️ MTB ↔️ GRAVEL ↔️ INDOOR TRAINER
[ ↔️ UNICYCLE ↔️ TRICYCLE ... if you insist 🤷🏻♂️ ]
That's the original idea behind CyclOptim, from day one: ultra-versatile power meters that let you switch easily from one discipline to another.

Technology built into the spindle. Platform change in less than 4 minutes.
Compare the Classic Pack with our other Combos.
2 Spindles included
2 sensor spindles (left and right)
2 Spindles included
1 sensor spindle (left)
1 standard spindle (right)
2 Spindles included
2 pairs of sensor spindles
(2 left and 2 right)
4 Platforms included
2 MASSIF MTB / Gravel platforms (SPD®)
2 MACADAM Road platforms (SPD-SL® or KEO®)
4 Platforms included
2 MASSIF MTB / Gravel platforms (SPD®)
2 MACADAM Road platforms (SPD-SL® or KEO®)
4 Platforms included
2 MASSIF MTB / Gravel platforms (SPD®)
2 MACADAM Road platforms (SPD-SL® or KEO®)
✅ Dual-sided power
—✅ Power
(left leg × 2)
✅ Dual-sided power
—✅ Cadence
—✅ Cadence
—✅ Cadence
—✅ Left/Right balance
—❌ Left/Right balance
—✅ Left/Right balance
—✅ Efficiency
—✅ Efficiency
—✅ Efficiency
—Other data
✅ NP (Normalized Power)
✅ IF (Intensity Factor)
✅ Power zone distribution
✅ Power-to-weight ratio
Other data
✅ NP (Normalized Power)
✅ IF (Intensity Factor)
✅ Power zone distribution
✅ Power-to-weight ratio
Other data
✅ NP (Normalized Power)
✅ IF (Intensity Factor)
✅ Power zone distribution
✅ Power-to-weight ratio
🏅 Advantage
The most practical solution: accurate data on every terrain. Swap platforms and bikes in just minutes.
🏅 Advantage
The most affordable way to get started with power meters, on any terrain.
🏅 Advantage
The most complete option, ideal for riders who enjoy both road and mountain biking all year round. No need to ever swap your pedals again.
Please consult our general FAQ page for information on our other products.
Yes, the battery is replaceable. However, since it is sealed inside the spindle, the replacement can only be carried out by our team in our workshop. If needed, contact our customer service. But rest assured, you have plenty of time: our batteries are designed to withstand more than 1,000 full charge cycles before they begin to lose a little of their range.
The pedals communicate with GPS devices and smartwatches via ANT+ — the industry-standard protocol for sports sensors. If you're unsure whether your device is compatible, you can check the full list here.
Bluetooth (BLE) support is planned in a future software update, expanding compatibility with even more devices.
Our power meters are designed to be used across all your riding styles (road, mountain bike, gravel). Swap platforms and keep your sensor spindles. Our Combo Packs are our different bundles at attractive prices, giving you all the accessories you need (spindles and platforms, depending on how you ride). You can save up to €130 compared with buying separately.